Ness Security Products Securityguard III, Programming Manual

Page: 5 / 30

Doc ID. SG3PROG00103_03_2014.DOC 5
HOME 2
Press ON button three times (successive presses less than 4 seconds apart) to enter HOME 2 mode.
When display extinguishes system is armed in HOME 2 mode. HOME 2 mode may only be entered if
programmed and SecurityGuard is DISARMED.
Display
HOME 2
Display for exit delay duration
OK Light double flash every 2
seconds
Indicates SecurityGuard is in HOME 2 mode
Voice
“Home two”
If V-ARM option enabled
Siren
Internal: HOME 2 arming
tone
If V-ARM option disabled
Strobe flash for 5 seconds
DISARMED
Press OFF button once to DISARM or silence an alarm.
Display OFF Display for 5 seconds
OK Light
flash once every 5 seconds
Indicates SecurityGuard is functioning normally
Voice
“Disarmed”
If V-ARM option enabled
Siren 3 chirps internal
3 chirps external (if enabled,
and only if disarming from
ARMED mode) If alarm has occurred, then disarming from ARM,
HOME, or HOME 2 modes gives chirps:
•
Internal: if V-ARM option enabled then warning
message after chirps; if V-ARM option disabled
then rapid chirps for 5 seconds
•
External: rapid chirps for 5 seconds even if
external chirps disabled
Strobe
flash for 4 seconds
Note: this is twice the flash interval of ARMED mode
for differentiation
An optional entry delay may be programmed if desired.
KEY TYPES
USER KEY
•
3-button pendant key
•
Program option KEY or DURESS
•
Not supervised
•
Disable Panic on Radio Key
MEDICAL KEY
•
Pendant key
•
Program option MEDIC
•
Not supervised
FIXED PANIC BUTTON
•
Fixed single button panic
•
Program option KEY or DURESS
•
Supervised