background image

3

MaxiMailer HD Operator Manual

InTRODUCTIOn

With this inserter you have an advanced, medium-volume folding and inserting machine. Its 

modular construction allows up to 8 feed units to be fitted including DTI, with a maximum of 

14 feed trays. Its sophisticated software control optimises the order and flow of documents 

for collating at the insert head before insertion into the envelope. All fold and adjustments 

take place automatically according to the requirements programmed in by the operator.

In order to ensure the long usage of this machine and its components, and above all the 

safe use of the machine, you must read and adhere to the operating instructions and safety 

notes. Always be aware of all warnings and notes that are mounted or noted on the machine 

itself.

All persons entrusted with the handling of this machine must also be familiar with 

the 

operating manual.

Save this handbook carefully, so that the information it contains may be available 

at all 

times.

1.1  Pictograms

 

 

General Warnings

 

 

Warning of danger from electricity or electrical shock

 

Information / Note indicating important information regarding the handling of 

the machine.

Summary of Contents for MaxiMailer HD






































































Reviews: