28
MaxiMailer HD Operator Manual
True Weight:
This shows the weight of the envelope in the units shown, and
is linked to
Thickness
described on the previous page. To enter a known
weight, press the ‘Computed’ button to uncheck the box, and then press the
‘True Weight’ button. Enter the required figure in the units shown. Note that
if this function is used
Paper Weight
will not be active. The true weight need
only be entered if Postage Rates are being used (see page 36).
amount of wetting required:
Different envelope types may require a
greater or lesser amount of wetting for an effective seal. If you wish to
change from the default setting of 3, press the appropriate button where
setting 1 is the least, 4 is the greatest.
OMR name:
This function is not available for envelopes.
label name:
Press this button if you are using barcodes or other labels for
verification checking at output, then press the
name
button and select a label
setup (see OMR/Barcode User’s Manual for defining barcode setups).
Note
that the label can be printed either on the document (for reading through the
window), or on the envelope.
note: OMR or barcode reading are optional
features
Press the ‘Save as Default’ button if you wish this to be the setup that new
envelopes will default to.
When all editing is complete, press the
save
button at the bottom of the
screen, and then the
exit
button to return to the list box.
editing the
settings.
(contd.)