27
MaxiMailer HD Operator Manual
From this screen you can edit the Envelope setup that was selected in the list box (see page
20) or
press
‘New’ if creating a new setup. The setup name and all envelope parameters can
be changed as required.
Press
name
and edit the name as required, either by typing it or by using
the on-screen keyboard. Any changes made here will be reflected in the
Documents list box when the Documents screen is saved and exited.
Warning! Do not edit the name for an envelope currently used in any
configuration. If you do, the factory default document ‘DL’ will be
used instead.
Icon:
Select the icon from a preset list - this icon that will then appear in the
graphic on the Configuration screen (see page 29).
Width/Depth/Paper Weight/flap:
Press the appropriate button and enter
the required setting for the envelope’s width, depth, weight (in the units
shown) and flap length - see also
Thickness
below.
Thickness:
If the envelope is of very thick material or of unknown weight,
press the ‘Computed’ button to uncheck the box, and then press the
‘Thickness’ button. Enter the required figure in mm. Note that if this function
is used
Paper Weight
above will not be active.
editing
the setup
name.
editing the
settings.
5.8 The envelopes screen