48
ORIG0019/A-48
4127763C/A
15/03/2006
Envelope moistener
7.
ENVELOPE MOISTENER
The IJ 40/50 Postage Meter used in conjunction with a Moistener
Unit will seal and print envelopes in a single operation.
The moistener may be set to non-seal mode if sealing is not
required enabling the unit to be used as a normal feed platform.
If seal only is required, the postage meter mode may be set to
SEAL ONLY
.
The Moistener Unit may be used with an Autofeed Unit or with the
Hand Feed Platform.
7.1
Using the Envelope Moistener with Plain Platform
- Set the Moistener ON/OFF control to
(ON).
- Press the
button, after a short pause the motor will start.
- Each envelope must be fed into the moistener unit with the flap
downwards and top edge against the platform mail guide. A two
handed approach is preferable with particular attention being
paid to keeping the envelope flat.
- A continuous sliding action is made until the envelope contacts
the postage meter rollers. The envelope will be drawn through the
postage meter and deposited into the receiving tray.
7.2
Using the Envelope Moistener with an Autofeed
- Set the Moistener ON/OFF control to
(ON).
- Load the Autofeed Platform as detailed in "Postage printing with
autofeed".
- Press the
button, after a short pause the motor will start and
sealed envelopes will be deposited into the receiving tray.
