ORIG0019/A-29
4127763C/A
15/03/2006
29
Printing postage
3.
PRINTING POSTAGE
3.1
Introduction
In order to achieve the best impression, the IJ 40/50 requires an
even surface on which to print, therefore on bulky or uneven items
correct folding of the contents will help considerably. Use a label
if in doubt.
It is sometimes unavoidable that your mail will contain staples,
paper clips and other fixings. The machine will accept these, but
it is recommended that the fixings are situated at the bottom of the
envelope. This will avoid the risk of damage to your printing head.
In the event that a satisfactory print cannot be achieved due to bulky
contents (Max.3/8") the envelope should be treated as a parcel
and a label used.
It is recommended that the IJ 40/50 is left powered on at all times.
This will assist in maintaining print quality. In the event that you
have to power the system down, first press
to allow the system
to return to standby mode, then wait for approximately one minute
to allow the ink cartridge to return to the park position before
removing the power.
