NE-10
Battery Installation for the Remote Control
1. Remove the insulating mylar strip from the battery if the
battery is being used for the first time. It is located at the
bottom back side of the remote control.
2. Unwind the screw and slide open the battery
compartment of the remote control.
3. Unwind the screw and slide open the battery compartment
of the remote control.Close the battery compartment cover and
wind the screw back on.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or
battery leakage and may result in physical injury and/or property damage including fire.
