STEP 1.
Inspect shipping package and contents to ensure no damage has
occurred during shipping.
STEP 2.
Open XR Wiring Cover with 7mm hex socket driver. Allow Lens to
hang via retention strap.
NOTE:
Screws are captive fasteners and will remain attached to the Lens for ease
of reinstall and prevent loss of fasteners.
STEP 3.
Install provided double-sided tape along side of surge protector and
secure to XR body near AC input. Secure the surge protector
and driver lead wires together as close to the origin of the driver lead
wires as possible using the provided zip tie.
STEP 4.
Wire according to wiring instructions on Page 12-14. Refer to
NEC/CEC codes and follow all applicable local standards.
STEP 5.
Close XR Wiring Cover. Ensure the retention cable is not pinched
between XR Head and the XR Wiring Cover. Tighten lens bolts using
a 7mm socket or box wrench to 1.7 N-m (15 in-lbs).
XR-SP-HV
PART NAME
QTY
1
1
1
BSP3-480-20KA SURGE PROTECTOR
3M VHB TAPE
4" zip tie
XR-SP-HV – SURGE SUPPRESSOR KIT
This XR-SP-HV kit is intended for use with UL Listed
XR luminaire as marked on the luminaire nameplate.
Accessory Package Contents
INSTALLATION STEPS
TM
Nemalux
I N D U S T R I A L
XR-GEN
rev. A-13
13-14
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
SURGE PROTECTOR LOCATION
