XR-CM –
CONDUIT MOUNT INSTALLATION
Refer to alternate instructions if using Wall, Hook, Pole or Yoke Mount
Step 2
STEP 1.
Inspect shipping package and contents to ensure no damage has
occurred during shipping.
STEP 2.
When using the R-CC anti-rotation lock, slide it first onto suitably
mounted hanging conduit or luminaire hanger loosley tighten set
screw.
Fixed Rigid Metal Conduit or luminaire hanger must be suitably
mounted to prevent rotation and system must be rated for 110 lbs.
Install luminaire onto ¾” NPT threaded nipple. Tighten to hand tight
contact plus 1 to 2 turns. When using the R-CC losen set screw and slide
R-CC into place with flats aligned to those on luminaire hub and tighten
set screw to lock unit in place.
NOTE:
To aid in assembly and provide protection against ingress, use of a petrolatum
or soap thickened mineral oil based thread lubricant/sealant is necessary.
Un-used conduit opening must be plugged to maintain the integrity of the
enclosure.
STEP 3.
Install Secondary Safety Cable by looping appropriate steel cable or
chain through the outer band of the unit and fastening a closed loop.
Secondary safety hardware must be rated for a minimum of 110lbs.
Install remaining loop of secondary safety chain or steel cable to
suitable mounting location and fasten securely. Secondary safety
hardware must be rated for 110lbs.
STEP 4.
Resume installation instructions provided with luminaire. (STEP 4 in XR
Installation Instructions from the Surface/Ceiling Mount installation
provided with Luminaire).
Step 3
**Per NEC 314.23H2 pendant/conduit installation below 8ft (2.4m) requires the
use of an anti-rotation mechanism. R-CC accessory required. Order seperately.
This R-CC kit is intended for use with UL Listed XR luminaire as marked on the
luminaire nameplate.
INSTALLATION STEPS
R-CC
PART NAME
QTY
1
ANTI-ROTATION BRACKET ASSEMBLY
TM
Nemalux
I N D U S T R I A L
XR-GEN
rev. A-11
10-14
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
This kit contains Anti-Rotation-Lock
(1004-01-02-201)
Step 2
Step 3
INSTALLATION STEPS
R-CC
PART NAME
QTY
1
ANTI-ROTATION BRACKET ASSEMBLY
TM
Nemalux
I N D U S T R I A L
rev. A-13
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
This kit contains Anti-Rotation-Lock
(1004-01-02-201)
