INSTALLER INSTRUCTIONS
nekos
products have been manufactured in accordance with safety standards and conforms to the
stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
Symbols used in the manual
DANGER
This indication draw the attention about potential dangers for
health of peoples and animals.
Contents
1. SECURITY RULES ................................
2. FORMULAS AND RECOMME
2.1. Calculation of opening / closure force
2.2. Maximum opening in accordance with sash height
3. TECHNICAL INFORMATIO
4. CONSTRUCTION AND REG
5. USE OF ACTUATOR IN SYNCRO³ VERSION
5.1. Recognition ................................
5.2. Use of a Syncro³-version actuator
6. ID PLATE AND MARKING DATA
7. TECHNICAL DATA ................................
8. ACTUATOR DIMENSIONS
9. ELECTRICAL POWER SUP
9.1. Selection of power cable section
10. INSTRUCTIONS FOR ASS
10.1. Preparation of actuator for assembly
10.2. Calculation of the number of push / retention points
10.3. Assembly with outward opening window
10.4.
Installation on domed rooflights, dormers or industrial skylights
10.5. Assembly with opening
10.6.
Installing the actuator and rod (or transmission) with connection bar
11. ELECTRICAL CONNECTIO
11.1. Connections of SKYRO 850
11.2. Connections of SKYRO 850 SYNCRO³
12. PROGRAMMING THE ACTU
12.1.
RESET
Procedure ................................
12.2. Closing stroke-end ................................
12.3. Overlap acquisition ................................
12.4. LED Light signals ................................
13. CHECKING FOR CORRECT
14. EMERGENCY MANOEUVRES
15. TROUBLESHOOTING ................................
16. ENVIRONMENTAL PROTEC
17. CERTIFICATE OF GUARANTEE
18. DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE)
AND EC DECLARATION OF CONFORMITY
3
INSTALLER INSTRUCTIONS
products have been manufactured in accordance with safety standards and conforms to the
stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
Symbols used in the manual
This indication draw the attention about potential dangers for
health of peoples and animals.
................................................................................................
FORMULAS AND RECOMMENDATIONS FOR INSTALLATION ................................
Calculation of opening / closure force ................................................................
Maximum opening in accordance with sash height ................................
TECHNICAL INFORMATION ABOUT FUNCTION ................................
CONSTRUCTION AND REGULATORY REFERENCES ................................
USE OF ACTUATOR IN SYNCRO³ VERSION ................................
................................................................................................
version actuator ................................................................
DATA ................................................................
................................................................................................
ACTUATOR DIMENSIONS ................................................................
ELECTRICAL POWER SUPPLY ................................................................
Selection of power cable section ................................................................
INSTRUCTIONS FOR ASSEMBLY ................................................................
Preparation of actuator for assembly ................................................................
Calculation of the number of push / retention points ................................
Assembly with outward opening window ................................
Installation on domed rooflights, dormers or industrial skylights
Assembly with opening inwards ................................................................
Installing the actuator and rod (or transmission) with connection bar
ELECTRICAL CONNECTIONS ................................................................
SKYRO 850 ................................................................
SKYRO 850 SYNCRO³ ................................
PROGRAMMING THE ACTUATOR ................................................................
................................................................
................................................................
................................................................
..............................................................................................
CHECKING FOR CORRECT ASSEMBLY ................................................................
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING ...............................
................................................................................................
ENVIRONMENTAL PROTECTION ................................................................
CERTIFICATE OF GUARANTEE ................................................................
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE)
EC DECLARATION OF CONFORMITY ..............................................................
INSTALLER INSTRUCTIONS
products have been manufactured in accordance with safety standards and conforms to the
When correctly assembled, installed and used according to the present instructions, they will not
This indication draw the attention about potential dangers for safety and
....................................... 4
.................................. 5
....................................... 5
................................................... 5
........................................................ 5
............................................... 6
.............................................................. 7
........................................... 7
......................................... 7
.................................................. 7
....................................... 8
........................................................... 9
................................................... 9
......................................... 10
............................................. 10
................................. 10
.......................................... 11
............................................................ 11
Installation on domed rooflights, dormers or industrial skylights
............................. 12
........................................ 12
Installing the actuator and rod (or transmission) with connection bar
...................... 13
................................................... 14
.............................................. 15
............................................................. 15
............................................ 16
............................................................ 16
............................................................ 17
........................................................... 17
.............................. 18
.................................. 19
............................... 20
................................ 20
............................................. 20
................................................ 21
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE)
.............................. 22
1. SECURITY RULES
C
AREFULLY OBSERVE ALL
PERSONAL SAFETY
.
I
MPROPER INSTALLATION
MANDATORY RISK ANALY
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
IEC 60335-2-103 (Particular requirements for drives for gates, doors and windows) and other
directives and regulations indicated in the attached Declarations of Incor
Conformity (at the end of the manual). According to the Machinery Directive, actuators are
“partly completed machinery” intended for incorporation into doors and windows. The
manufacturer/supplier of the window is required, with exclusive r
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
any case, the supplier of the complete sys
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, w
or possible malfunction or accidental breakage of the automated windows, and to implement
suitable protective measures in view of these. Such measures include those recommended
by the specified standard:
- controlling the actuators via a “deadman’s button” placed near the system and within the
operator’s field of view, to ensure that people are out of the way during operation. The
button must be placed at a height of 1,5 m and operated by key if accessible to the
public; or:
- use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
IEC 60335-2-103; or:
- use of non-contact safety systems (lasers, light grids); or:
- use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
- are installed at a height of >2.5 m; or:
- have a leading-edge opening of <200 mm and a closing speed of <15 mm/s; or:
- are part of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or secured in order to prevent them from suddenly
falling or collapsing: e.g. the use of safety arms on bottom
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
not allow children to play with the fixed
out of their reach.
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
After removing packaging, check for any damage
Always request exclusive use of original spare parts. Failure to respect this condition
could compromise safety and invalidate the benefits contained in the warranty for the
appliance.
In the event of any problems or queries, consult your
manufacturer directly.
4
AREFULLY OBSERVE ALL THE FOLLOWING INSTALLATION INSTRUCTIONS
MPROPER INSTALLATION CAN SERIOUSLY ENDANG
MANDATORY RISK ANALYSIS AND PROTECTION MEASURES
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
103 (Particular requirements for drives for gates, doors and windows) and other
directives and regulations indicated in the attached Declarations of Incor
Conformity (at the end of the manual). According to the Machinery Directive, actuators are
“partly completed machinery” intended for incorporation into doors and windows. The
manufacturer/supplier of the window is required, with exclusive responsibility, to ensure the
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
any case, the supplier of the complete system retains full liability.
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, wounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to implement
in view of these. Such measures include those recommended
e actuators via a “deadman’s button” placed near the system and within the
operator’s field of view, to ensure that people are out of the way during operation. The
button must be placed at a height of 1,5 m and operated by key if accessible to the
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
contact safety systems (lasers, light grids); or:
use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
are installed at a height of >2.5 m; or:
edge opening of <200 mm and a closing speed of <15 mm/s; or:
smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or secured in order to prevent them from suddenly
g. the use of safety arms on bottom-hung windows.
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
not allow children to play with the fixed controls and keep any remote
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
After removing packaging, check for any damage on the appliance.
Always request exclusive use of original spare parts. Failure to respect this condition
could compromise safety and invalidate the benefits contained in the warranty for the
In the event of any problems or queries, consult your
LATION INSTRUCTIONS TO ENSURE
CAN SERIOUSLY ENDANGER SAFETY
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
103 (Particular requirements for drives for gates, doors and windows) and other
directives and regulations indicated in the attached Declarations of Incorporation and CE
Conformity (at the end of the manual). According to the Machinery Directive, actuators are
“partly completed machinery” intended for incorporation into doors and windows. The
esponsibility, to ensure the
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
risk analysis
ounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to implement
in view of these. Such measures include those recommended
e actuators via a “deadman’s button” placed near the system and within the
operator’s field of view, to ensure that people are out of the way during operation. The
button must be placed at a height of 1,5 m and operated by key if accessible to the
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
edge opening of <200 mm and a closing speed of <15 mm/s; or:
smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or secured in order to prevent them from suddenly
hung windows.
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
controls and keep any remote-control units
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
on the appliance.
Always request exclusive use of original spare parts. Failure to respect this condition
could compromise safety and invalidate the benefits contained in the warranty for the
agent or contact the
