LED Status
STEADY-ON
Device powered correctly.
The device has correctly performed a return stroke and is completing the
operation by memorising the position, or is currently in movement
FLASHING
Device powered correctly.
The device has successfully
of flashes indicates the number previously assigned to the de
the
R
ESET
LED Status
STEADY-ON
Duration < 0.5 sec.
Internal memory write process in progress.
STEADY-ON
RESET
STEADY-ON for 3
sec.
Overlap acquisition procedure finished correctly.
FLASHING
RESET
number assigned to the device in a configuration with several d
13. CHECKING FOR CORRECT ASSEMBLY
CAUTION:
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
testing after installation are necessary
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during assembly.
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
require more energy in order to slide
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
right compression on the seals. Otherwise, there
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
self-tapping or self-drilling screws on alum
would tear the profile after a few operations; use metric screws with threaded inserts
(see the indications in § 10.1
Check that the power cord does not impede the rotation of the actuator or interfere with
proper operation; this could affect the safety of persons and property
Check that the window reaches the desired position according to the stroke
selected.
19
WITH GREEN LED
Meaning
Device powered correctly.
The device has correctly performed a return stroke and is completing the
operation by memorising the position, or is currently in movement
Device powered correctly.
The device has successfully performed an outward stroke
of flashes indicates the number previously assigned to the de
ESET
procedure
WITH ORANGE LED
Meaning
Internal memory write process in progress.
Procedure in progress.
Overlap acquisition procedure finished correctly.
Procedure finished correctly. The number of flashes indicates the
number assigned to the device in a configuration with several d
CHECKING FOR CORRECT ASSEMBLY
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
ation are necessary.
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during assembly.
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
more energy in order to slide.
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
right compression on the seals. Otherwise, there is no certainty of complete closure
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
drilling screws on aluminium windows is not recommended as they
would tear the profile after a few operations; use metric screws with threaded inserts
(see the indications in § 10.1)
.
Check that the power cord does not impede the rotation of the actuator or interfere with
operation; this could affect the safety of persons and property
Check that the window reaches the desired position according to the stroke
The device has correctly performed a return stroke and is completing the
operation by memorising the position, or is currently in movement.
performed an outward stroke. The number
of flashes indicates the number previously assigned to the device during
Procedure finished correctly. The number of flashes indicates the
number assigned to the device in a configuration with several devices.
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
Check that the window is perfectly closed at corners and that there are no obstacles
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
is no certainty of complete closure.
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
inium windows is not recommended as they
would tear the profile after a few operations; use metric screws with threaded inserts
Check that the power cord does not impede the rotation of the actuator or interfere with
operation; this could affect the safety of persons and property.
Check that the window reaches the desired position according to the stroke-end
14. EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require
problem with the mechanism or for normal maintenance or externa
frame, proceed as follows:
1. Unscrew the nut from the pivot screw securing the rack to the sash bracket.
2. Hold the window in one ha
(this operation should be performed with the window open at least 10 cm to facilitate
the extraction of the screw)
3. Manually open the window frame.
A
TTENTION
:
DANGER
position by the rack
4. After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
In the event in which the cable of feeding it is damaged, to make to replace it from the
constructor or a qualified technician.
15. TROUBLESHOOTING
Please consult the following table for any eventual problems with function during
installation or normal use. Check also the
Problem
Possible cause
Gear motor
does not work.
No electricity at source.
Lead not connected, or one of the
wires has come loose.
The electrical supply is incorrect
The actuator
switches on but
does not
function
Electrical wiring error
Connection with other
incompatible machines
16. ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
various type, cuprum.
Dispose materials in conformity with local regulations about removal.
20
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require manual opening due to power failure or
problem with the mechanism or for normal maintenance or external cleaning of the window
Unscrew the nut from the pivot screw securing the rack to the sash bracket.
Hold the window in one hand and pull the pivot screw out of the hole with the other
(this operation should be performed with the window open at least 10 cm to facilitate
the extraction of the screw)
.
Manually open the window frame.
DANGER
– the window could fall as the sash is no longer held in
position by the rack
.
After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
In the event in which the cable of feeding it is damaged, to make to replace it from the
r a qualified technician.
Please consult the following table for any eventual problems with function during
Check also the
R
ED
LED indications:
Possible cause
electricity at source.
Check trip switch and safety switch.
Lead not connected, or one of the
wires has come loose.
Check all electrical connections on
gear motor.
The electrical supply is incorrect
Check whether the power supply to
the actuator has
indicated in the technical data plate
Electrical wiring error
Check the electrical connections of
the individual wires and their
function
Connection with other
incompatible machines
Check that the machines connected
in the array are compatible by
consulting the relevant instruction
manuals
ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
onformity with local regulations about removal.
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
manual opening due to power failure or
l cleaning of the window
Unscrew the nut from the pivot screw securing the rack to the sash bracket.
nd and pull the pivot screw out of the hole with the other
(this operation should be performed with the window open at least 10 cm to facilitate
the window could fall as the sash is no longer held in
After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
In the event in which the cable of feeding it is damaged, to make to replace it from the
Please consult the following table for any eventual problems with function during
Solution
Check trip switch and safety switch.
Check all electrical connections on
Check whether the power supply to
the actuator has the voltage
indicated in the technical data plate
Check the electrical connections of
the individual wires and their
Check that the machines connected
in the array are compatible by
consulting the relevant instruction
All materials used in the manufacture of this appliance are recyclable.
accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
onformity with local regulations about removal.
