LED Status
STEADY-ON
Duration < 0.5 sec.
Internal memory write process in
STEADY-ON
RESET
STEADY-ON for 3
sec.
Overlap acquisition procedure finished correctly.
FLASHING
RESET
the number assigned to the device in a configuration with several
devices.
13. CHECKING FOR CORRECT ASSEMBLY
CAUTION:
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
testing after installation are necessary
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during assembly
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
require more energy in order to slide
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
right compression on the seals. Otherwise, ther
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
self-tapping or self-drilling screws on alu
would tear the profile after a few operations; use metric screws with threaded inserts
(see the indications in § 10.1
Check that the power cord does not impede the rotation of the actuator or interfere with
proper operation; this could affect the safety of persons and property
Check that the window reaches the desired position according to the stroke
selected.
14. EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require
problem with the mechanism or for normal maintenance or externa
frame, proceed as follows:
1. Unscrew the nut from the pivot screw securing the rack to the sash bracket.
2. Hold the window in one ha
(this operation should be performed with the window open at least 10 cm to facilitate
the extraction of the screw
3. Manually open the window frame.
A
TTENTION
:
DANGER
position by the rack
19
WITH ORANGE LED
Meaning
Internal memory write process in progress.
Procedure in progress.
Overlap acquisition procedure finished correctly.
Procedure finished correctly. The number of flashes indicates
the number assigned to the device in a configuration with several
devices.
CHECKING FOR CORRECT ASSEMBLY
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
ation are necessary.
Check that the window is perfectly closed at corners and that there are no obstacles
caused by incorrect positioning during assembly.
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
more energy in order to slide.
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
right compression on the seals. Otherwise, there is no certainty of complete closure
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
drilling screws on aluminium windows is not recommended as they
would tear the profile after a few operations; use metric screws with threaded inserts
(see the indications in § 10.1)
.
Check that the power cord does not impede the rotation of the actuator or interfere with
r operation; this could affect the safety of persons and property
Check that the window reaches the desired position according to the stroke
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
In the event that the window frame should require manual opening due to power failure or
problem with the mechanism or for normal maintenance or external cleaning of the window
Unscrew the nut from the pivot screw securing the rack to the sash bracket.
Hold the window in one hand and pull the pivot screw out of the hole
(this operation should be performed with the window open at least 10 cm to facilitate
the screw)
.
Manually open the window frame.
DANGER
– the window could fall as the sash is no longer held in
rack
.
Procedure finished correctly. The number of flashes indicates
the number assigned to the device in a configuration with several
In order the ensure perfect operation of the machine, its constant
performance over time and safety for persons and property, it must be installed in
accordance with professional standards, and therefore the following indications for
Check that the window is perfectly closed at corners and that there are no obstacles
Check the alignment of the actuator with the sash bracket; if out of line, the rack will
Check that when the window is closed there is a gap of at least 5 mm between the sash
bracket and the actuator body. This will ensure that the window closes properly, with the
e is no certainty of complete closure.
Check also that the attachments and support brackets are aligned with one another and
firmly secured to the window frame, and that the screws are properly tightened. The use
minium windows is not recommended as they
would tear the profile after a few operations; use metric screws with threaded inserts
Check that the power cord does not impede the rotation of the actuator or interfere with
r operation; this could affect the safety of persons and property.
Check that the window reaches the desired position according to the stroke-end
EMERGENCY MANOEUVRES, MAINTENANCE OR CLEANING
manual opening due to power failure or
l cleaning of the window
Unscrew the nut from the pivot screw securing the rack to the sash bracket.
pivot screw out of the hole with the other
(this operation should be performed with the window open at least 10 cm to facilitate
the window could fall as the sash is no longer held in
20
4. After maintenance and/or cleaning repeat points 1 and 2 in reverse order.
In the event in which the cable of feeding it is damaged, to make to replace it from the
constructor or a qualified technician.
15. TROUBLESHOOTING
Please consult the following table for any eventual problems with function during
installation or normal use. Check also the
R
ED
LED indications:
Problem
Possible cause
Solution
Gear motor
does not work.
No electricity at source.
Check trip switch and safety switch.
Lead not connected, or one of the
wires has come loose.
Check all electrical connections on
gear motor.
The electrical supply is incorrect
Check whether the power supply to
the actuator has the voltage
indicated in the technical data plate
The actuator
switches on but
does not
function
Electrical wiring error
Check the electrical connections of
the individual wires and their
function
Connection with other
incompatible machines
Check that the machines connected
in the array are compatible by
consulting the relevant instruction
manuals
16. ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials: aluminium, zinc, iron, plastic of
various type, cuprum.
Dispose materials in conformity with local regulations about removal.
17. CERTIFICATE OF GUARANTEE
The manufacturer will guarantee good function of the appliance. The manufacturer shall
undertake to replace defective parts due to poor quality materials or manufacturing defects
in accordance with article 1490 of the Civil Code. The guarantee covers products and
individual parts for
2 years
from the date of purchase. The latter is valid as long as the
purchaser possesses proof of purchase and completion of all agreed conditions of
payment.
Guarantee of good function of appliances agreed by the manufacturer implies that the
latter undertakes to repair or replace free of charge and in the shortest period possible any
parts that break while under warranty.
The purchaser is not entitled to any reimbursement for eventual direct or indirect damage
or other expenses incurred. Attempt to repair by personnel unauthorised by the
manufacture shall render the warranty null and invalid.
