Page 3
INSTALLER INSTRUCTIONS
nekos
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
will not generate any danger for persons, animals or items.
Symbols used in the manual
DANGER
This indication draw the attention about potential dangers
for safety and health of peoples and animals.
Contents
1.
SAFETY INDICATIONS .............................................................................................. 4
1.1. General notes ..................................................................................................... 4
1.2. Notes for installer ................................................................................................ 4
2.
CONSTRUCTION AND REGULATORY REFERENCES ............................................. 5
3.
TECHNICAL DATA ..................................................................................................... 5
4.
ID PLATE AND MARKING DATA ................................................................................ 5
5.
RECOMMENDATIONS AND INSTRUCTIONS FOR ASSEMBLY .............................. 6
6.
TECHNICAL OPERATING INFORMATION ................................................................ 7
6.1. General instructions ............................................................................................ 7
6.2. Programming ..................................................................................................... 7
6.3. Settable functions ............................................................................................. 13
6.4. Saving a PIK radio remote control ..................................................................... 16
6.5. Saving a radio remote control without access to the board ................................ 17
7.
OVERALL DIMENSIONS ......................................................................................... 18
8.
CONNECTION DIAGRAM OF THE STATION .......................................................... 19
9.
ENVIRONMENTAL PROTECTION ........................................................................... 21
10. CERTIFICATE OF GUARANTEE .............................................................................. 21
11. DECLARATION OF CONFORMITY .......................................................................... 22
Page 4
1. SAFETY INDICATIONS
1.1. General notes
ATTENTION: Before installing this appliance, ensure all safety
indications have been read carefully and understood in order to
prevent contact with electricity, injury or any other incident. The
manual should be conserved for further consultation at a later date.
The manufacturer accepts no responsibility for damage to people,
animals or things incurred by improper use or inobservance of the
basic safety rules described in this manual.
Use for any applications other than those indicated must be authorised
by the manufacturer after technical review of the assembly.
The device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lacking experience and
knowledge. Do not allow children to play with the fixed controls and keep
any remote-control units out of their reach.
Do not use solvents or jets of water to wash the appliance.
1.2. Notes for installer
This device is intended only and exclusively for the use for which it was
designed, and the manufacturer cannot be held liable for damage due to
improper use.
KH../R
and
KL../R
have been designed and constructed exclusively to execute
maneuvers for closing and/or opening windows, roll-up blinds, curtains and sunshades,
assisted by the aid of sensors for rain and wind.
Specific use is reserved for automatic ventilation and air-conditioning of rooms, which
is carried out through the connected motors.
The appliance must be installed by competent and qualified technical
personnel following manufacturer’s indications. Improper installation and
use make the unit dangerous for people and things.
A device which assures the complete omnipolar disconnection from the grid,
with minimum distance of 3 mm between contacts, should be installed
upstream of the automation control line.
The box containing the electric panel must be placed in a proper
environment, fixed with suitable screws and using its supports.
For the electrical connection to feeding grid use cables suitable for power
supply in buildings and other civil engineering works, e.g. H05VV-F type.
Before carrying out any cleaning or maintenance, make sure the equipment
has been disconnected from the electricity supply.
Attention:
in the event of breakage or malfunction, switch the appliance off
at the general switch and call for the services of a qualified technician.