NEFF B46E74.3GB, Instruction Manual

Page: 12 / 32

12
Setting the clock
You can only change the clock when no other clock function is
active.
1.
Press the
KJ
clock function button repeatedly until
the
KJ
and
3
symbols light up.
2.
Set the clock using the rotary selector.
The setting is applied automatically.
Rapid heat up
You can reduce the heating up time for the
3
CircoTherm®
and ë Bread-baking operating modes if the set temperature is
higher than 100 °C.
Note:
During Rapid heat up, do not place any food in the
cooking compartment for as long as the f symbol is lit.
1.
Set the operating mode and temperature.
The appliance heats up.
2.
Press the
KJ
clock function button until the
KJ
and
f
symbols light up and Πappears in the clock display.
3.
Turn the rotary selector clockwise.
Ž
is displayed in the clock display and the
f
symbol lights
up. Rapid heat up is activated.
After reaching the set temperature, Rapid heat up switches off.
The
f
symbol goes out.
Checking, correcting or deleting settings
1.
To check your settings, press the KJ clock function button
repeatedly until the corresponding symbol lights up.
2.
If necessary, you can correct your setting using the rotary
selector.
3.
If you wish to cancel your setting, turn the rotary selector anti-
clockwise to the original value.
Childproof lock
In this section, you can read about
■
how to lock your appliance
■
how to lock your appliance permanently
Lock
Once it has been locked, the appliance cannot be switched on
accidentally or by unauthorised users (e.g. by children playing).
To switch the appliance on again, you must unlock it. After
appliance operation, the appliance is not automatically locked.
Lock it again if necessary or activate the permanent lock.
Lock appliance
1.
Switch off the appliance.
2.
Press and hold the ± info button for 3 seconds to go to the
basic settings menu.
3.
Press the ± info button briefly and repeatedly until ™‚‹
appears in the temperature display.
4.
Turn the temperature selector until
™‚‚
appears on the
temperature display.
5.
Press and hold the
±
info button until the
‚
symbol appears
in the temperature display.
Note:
If you try to switch on the locked appliance, - † - appears
on the temperature display and “controls locked” appears on
the text display.
Unlocking the appliance
1.
Press and hold the
±
info button until
™‚‚
appears in the
temperature display.
2.
Turn the temperature selector until
™‚‹
appears on the
temperature display.
3.
Press and hold the
±
info button until the
‚
symbol goes
out.
Permanent lock
Once it has been permanently locked, the appliance cannot be
switched on accidentally or by unauthorised users (e.g. by
children playing).
To switch the appliance on, you must interrupt the permanent
lock briefly. After you have switched your appliance off, it locks
again automatically.
Locking the appliance permanently
1.
Switch off the appliance.
2.
Press and hold the ± info button for 3 seconds to go to the
basic settings menu.
3.
Press the
±
info button briefly and repeatedly until
™‚‹
appears in the temperature display.
4.
Turn the temperature selector until
™ƒ‚
appears on the
temperature display.
5.
Press and hold the
±
info button for 3 seconds.
Your appliance will be locked after 30 seconds. The
‚
symbol appears in the temperature display
Note:
If you try to switch on the locked appliance, -
†˜
appears
on the temperature display and “Appliance permanent lock”
appears on the text display.
Interrupting permanent lock
1.
Press and hold the ± info button until ™ƒ‚ appears in the
temperature display.
2.
Turn the temperature selector until
™ƒ‹
appears on the
temperature display.