Nederman FlexPAK Setting Manual Download

Page: 42 / 55

FlexPAK

4.2.47 AUX Setting

In the menu “AUX Setting”, set parameter values related to AUX temperature input.

ESC

AUX Se!ng 1/2
MaxS

=50

MaxR

=50

MinR

MinS

Larm

=Oﬀ

MaxS = Default 50°C
MaxR = Default 50°C
MinR = 0°C
MinS = 0°C

ESC

AUX Se!ng 2/2
Stat

=Oﬀ

Tdly

=10:00s

Larm = Default Off
Stat = Default Off
Tdly = Default 10:00 s

MaxS = Set Temperature Threshold

Maximum accepted Temperature. If the temperature passes above MaxS, the Max temperature alarm activates.

When the Temperature Alarm Delay Timer is elapsed = TDly, the unit stops.

MaxR = Reset Temperature Threshold

If the temperature alarm is activated and Temperature Alarm Delay Timer not elapsed = TDly > 0 and the tem-

perature is lower than MaxR, the alarm is reset and FlexPAK is not stopped. Always set MaxR = MaxS!

MinS = Set Temperature Threshold

Minimum accepted Temperature. If temperature passes below MinS, the FlexPAK unit Min temperature alarm

activates. When the Temperature Alarm Delay Timer is elapsed = TDly, the unit stops.

MinR = Reset Temperature Threshold

If the temperature alarm is activated and Temperature Alarm Delay Timer is not elapsed = TDly > 0 and the tem-

perature is higher than MinR, the alarm is reset and FlexPAK is not stopped. Always set MinR = MinS!

Larm = Larm Activation

If Stat = off, AUX Sensor Activation. The Warning and Alarm functions are disabled.
If parameter Larm =off, only Warning messages are displayed when the Aux temperature passes any of the

Temperature Thresholds. Alarm/Stop functionality is disabled. If parameter Larm =on, Warnings and Alarm mes-

sages are displayed. Fan off function is enabled when the Aux temperature passes any of the Temperature

Thresholds. Attention! The Alarm message and Fan stop function are time delayed. Alarm time delay is set in

parameter TDly.

Stat = AUX Sensor Activation

Set parameter Stat = On, Temperature sensor installed
Set parameter Stat = Off, Temperature sensor not installed

TDly = Alarm Time Delay

This parameter sets Alarm Time Delay in seconds
The default is 10:00 seconds.

Summary of Contents for FlexPAK
























































Search results

Summary of Contents for FlexPAK

Reviews:

Related manuals for FlexPAK

Brands by name

Popular brands

Nederman FlexPAK, Setting Manual

Search results

Summary of Contents for FlexPAK

Reviews:

Related manuals for FlexPAK

Brands by name

Popular brands