Nederman FlexPAK, Setting Manual

Page: 14 / 55

FlexPAK
Ppump -21 kPa → Pressure readings from the pump pressure sensor
CFdP 2.8 kPA
→
Control Filter dp pressure
MaxdP 5.0 kPa → Control Filter Max dp pressure Limit setting
See “CFdP Setting” for more information
Displayed when Main Filter and Control Filter are installed
ESC OK
Ppump -22 kPa
MF dP 1.8 kPa
CF dP 0.8 kPa
MF Lim 5.0 kPa
CF Lim 5.0 kPa
ESC
MFdP Setting, Set = ON
CFdP Setting, Set = ON
Press the “OK” button to close the display.
Ppump -20 kPa
→
Pressure readings from the pump pressure sensor
MFdP 1.8 kPA → Main Filter dp pressure
CFdP 0.8 kPA
→
Control Filter dp pressure
MF Lim 5.0 kPA → Main Filter Max dp pressure Limit setting
CF Lim 5.0 kPA
→
Control Filter Max dp pressure Limit setting
See “MFdP Setting” and “CFdP Setting” for more information
3.1.16 Emptying bin by rotary valve
When the system is configured for a simple TVFD without the limit mode sensor, the message below will be dis-
played when BIN emptying is performed. The message is displayed about Parameter → AEB-TVFD = Off.
ESC OK
EMPTYING BIN
Open Lower
Slide Valve
Remaing Time
02:00s
When the system is configured for emptying with a rotary valve the follow-
ing message is displayed during rotary valve operation.
14