NED
UME-0034-03
XCM8060SA_8040SA_6040SA
73
Mode
/
Level
:
First, choose the mode from the drop-down-list.
Next, set a value with the slider, the edit-box or the spin-button. Then, click
“Send” button.
Test Pattern
:
The signal will be sent to the camera every time you choose the menu in the drop-down-list.
8.6.5 Memory in camera
Memory Dump
:
Read the data from the camera
’s working memory.
Flash Load
:
Load the data from the camera
’s flash memory.
Flash Save
:
Save the data to the camera
’s flash memory.
Flash Initialize
:
Initialize the camera
’s flash memory with the factory default data.
8.7 Upgrade
When a new software version becomes available, please follow the below procedure.
1) Check that CLISBeeCtrl has not started.
2) Uninstall the old version of the software. (See
“8.4.Uninstall” )
3) Install new version of the software. (See
“8.3.Install” )
8.8 How to Program
Please refer to the sample programs in the CLISBeeCtrl¥SampleProgram folder.
8.9 Other Points of Note
1) Unauthorised reproduction of part or all of this software is strictly prohibited.
2) Unauthorised reverse engineering, decompiling, disassembling and modifying part or all of
this software is strictly prohibited.
3) The contents of this software may change in the future without notice.
