NED
XCM20125GIG
UME-0041-01
30
FrameTriggerConfig
0x0000A224
Frame Trigger Setting
Inverter
Bit[31]
OFF(0)
Input Invert OFF
Ext_out
Bit[30]
OFF(0)
Frame Trigger External Output OFF
Terminate
Bit[29]
OFF(0)
Input Terminate OFF
LineTriggerConfig
0x0000A228
Line Trigger Setting
Inverter
Bit[31]
OFF(0)
Input Invert OFF
Ext_out
Bit[30]
OFF(0)
Line Trigger External Output OFF
Terminate
Bit[29]
OFF(0)
Input Terminate OFF
LineTriggerMaskTimeR
0x0000A22C
0
Input Signal Hold Time
(Line Trigger, Rising)
LineTriggerMaskTimeF
0x0000A230
0
Input Signal Hold Time
(Line Trigger, Falling)
FrameTriggerMaskTimeR
0x0000A234
0
Input Signal Hold Time
(Frame Trigger, Rising)
FrameTriggerMaskTimeF
0x0000A238
0
Input Signal Hold Time
(Frame Trigger, Falling)
4.2 Acquisition Control
Starting and stopping image acquisition can be controlled via the camera
Acquistion control registers. After setting Acquisition Start, images are acquired
until Acquisition Stop is set.
・
register name
：
Acquisition Start / Stop
・
setting value
：
0
(
stop packet transmission
),
1
(
stop packet
transmission)
Figure
4-2-1 Acquisition-Frame Timing
①
After receiving Acquisition Start, frames are generated automatically in the
camera.
②
On receiving Acquisition Stop, packet transmission is stopped. If a frame is
partially generated when Stop is received, the current line will be captured up to the
last pixel and the final frame sent. This final frame may then have fewer lines than a
normal frame.
