NED
UME-0041-01 XCM20125GIG
17
3 Hardware
3.1 Camera Connection
Camera Link cables shall be used to connect the camera unit with the frame
grabber board.
1. Connect the camera to the PC with a LAN cable.
Notes:
1)Please use a CAT-5e or higher grade LAN cable to connect the camera to the
PC.
2)In countries requiring CE certification, please use a shielded cable.
3)Please use a Gigabit Ethernet compatible LAN port.
To add additional cameras use a NIC (Intel:
Gigabit CT Desktop Adapter
EXPI9301CTetc.) on the PCI or PCI-Express bus.
2. Connect the power to the camera.
Note:
Use a power cable to connect the camera power to the camera. Connect the
plug end of the cable to the camera, and the open end to the power supply. In
addition, a lens, lens mount, illumination, trigger controller, etc may be
required. P
lease choose equipment suitable for your application’s
requirements.
LAN Cable
above Cat5e grade
PC
NIC
Line scan camera
Camera Power Supply
DC＋12V 15W
Trigger controler
Power Supply
Cable
Figure 3-1-1 Connections between Camera and cable etc
