NED
XCM20125GIG
UME-0041-01
24
3.4.5 LVDS Output
If the receiver requires LVDS input, it can be connected by attaching resistors to
the camera outputs
Multidrop is not supported. Connect only 1 receiver per camera.
In addition, be sure to check that
Figure 3-4-5 External Trigger Output Connection Diagram (LVDS)
3.4.6 TTL Output
To use TTL output, connect the camera output as shown in figure 3-4-6.
The Lo level output is 0V, the Hi level output is 3.3V.
To avoid damaging the device, do not connect the
– pin.
Figure 3-4-6 External Trigger Output Connection Diagram (TTL)
external resistor
