NED
RCDL4K8GE
UME-0111-01
26
3.4.1 RS-422 Input
When using RS-422 for input, connect a differential input via twisted pair as shown
in figure 3-4-2.
For correct operation, make sure to connect GND.
With RS-422, multiple receivers can be connected to one driver.
In such a case, only terminate the furthest receiver.
On this camera, setting the Terminate setting to ON activates the terminator.
Notes:
Do not terminate multiple receivers. The signal level will decrease and the signal
will not be received correctly.
Figure 3-4-2 External Trigger Input Connection Diagram (differential)
3.4.2 LVDS Input
When using LVDS for input, connect in the same way as for RS-422, as Figure 3-4-2.
Again, be sure to set Terminate to ON and activate the terminator. If the terminator is
not activated the signal may not be received correctly.
Notes:
The LVDS Multidrop function is not supported. Only connect 1 device per driver.
If you need to send the signal to multiple cameras, it is possible to use the
camera’s external trigger output for a cascade connection.
