NED
RCDL4K8GE
UME-0111-01
60
4.2.8.2 Setting Input Signal for Encoder Source A
Sets Input signal for Encoder Source A.
・
Register name
Encoder Source A
・
VAL
off / LineIn1 / LineIn2 / LineIn3
(Example)
(when “LineIn1” is set on “Encoder Source A”)
Line Format : LineIn1
Figure 4-2-8-2 Encoder Source A
4.2.8.3 Setting Input Signal for Encoder Source B
Sets Input signal for Encoder Source B.
・
Register name
Encoder Source B
・
VAL
Off / LineIn1 / LineIn2 / LineIn3
(Example)
(when “LineIn2” is set on “Encoder Source B”)
Line Format : LineIn2
Figure 4-2-8-3 Encoder Source B
4.2.8.4 Setting Encoder Mode
Selects the method to decode the encoder pulse.
This can be usedfor trigger signals.
・
Register name
Encoder Mode
・
VAL
Four Phase(The combination by rising and falling edges on
pulses of Phase A and Phase B makes four states.
Four states are counted as one cycle of pulse of
"Four-phase". This can filter the unnecessary signals such
