12
IGNITION ADJUSTMENTS (SPARK GAPS)
1.
The ignition gap is factory set and fixed on all burners and should not be adjusted.
2.
In the event of a gas type conversion the correct pilot and pilot orifice must be used.
AERATION ADJUSTMENTS
The aeration is factory set and fixed on all burners and should not be adjusted.
Flame sensing rod- runs across
burner, height approx. 3mm above
rear burner rail,5mm past rear
burner rail
Spark rod
– eight approx.. 3-
4mm above front burner rail,
end in line with front burner
rail.