10
•
Place the right hand lower log (5) on to its two location studs and the Y shaped left lower log (4)
on to its locating studs.
•
Place pieces of ember wool in the two cut outs of the base board and on top of visible parts of
the base bard.
Do not place ember wool over the slotted main burner ports.
•
Do not fit any other logs or coals.
•
Wash hands after handling coals and/or logs and ensure children do not handle them as the
colouring may contain toxic dies.
COMMISSIONING PROCEDURE
•
Once the fire is installed.
•
Install media.
•
Refit doors/ glass.
•
Connect to gas and power.
•
Fit firebox door.
•
Check for gas leaks.
•
Carry out the lighting procedure.
•
Check burner pressures and inlet supply pressure (Valve is non adjustable).
•
Check appliance for combustion (CO) leakage.
•
Turn off.
•
Handover instructions to owner.
•
Instruct owner on how to operate the fireplace safely.
•
Instruct owner how to isolate the appliance in an emergency
.