Necta Samba Top, Installation Operation & Maintenance

Page: 24 / 76

© by N&W GLOBAL VENDING S.p.A.
18
12 2008 3335 00
programming
notes
the electronics intended to control the machine will en-
able the operator to use many functions or not.
the machine programme is intended to describe all
available functions, including those that are not used due
to the specific configuration of the model ( layout ).
The following is supplied with the machine:
Selection layout including the selections arranged for -
the specific model
Flow chart of programming menus. -
The main functions required to manage the machine
operation as well as possible are briefly explained here
below, not necessarily in the order they are displayed in
the menus.
The software release can be updated by using proper
systems (PC, Flash, Upkey etc.)
the messages intended to display the operation in
progress are fixed whereas the action the user is re -
quired to perform is flashing on and off.
The machine can work in three different operation
modes. The keyboard buttons may assume different
functions, according to its operation state.
Possible states are listed here below:
N
ormal opEratioN moDE
The machine is powered on (the door is closed) and all -
checks are performed.
The product is dispensed and messages are displayed
-
for the user.
f
illEr mENu
Statistical findings and execution of simple checks on -
the operation and on dispensing cycles.
t
EcHNiciaN mENu
Test functions, the setups and the performances of the -
machine are programmed on two levels:
rEDucED
t o manage the parameters of selections.
complEtE
The operations you can perform can modify operation
cycles. Therefore, they must be carried out by people
having a specific knowledge of the machine in terms of
electrical safety and sanitary rules.
NaVigaTioN modE
the interaction between the system and the operator
occurs through the following components:
Display
10-line graphical display intended to display the user
messages or the menu functions.
MEnu tItlE
option available
option available
option available
option available
option available
option available
option available
option available
TECHNICIAN> 2.1
If required, the menu title is highlit on the first line. -
MEnu tItlE
followed by all available options.
The line, on which the cursor is active, is highlit. -
option available
The last line specifies the menu, in which we are acting -
(Filler or Technician), followed by the numeric position
of the cursor (e.g. 2.1).
TECHNICIAN> 2.1