Necta Samba Top, Installation Operation & Maintenance

Page: 15 / 76

© by N&W GLOBAL VENDING S.p.A.
9
12 2008 3335 00
coNfiguraTioN of mulTimax TrayS
some models may have belt trays only used for dis-
pensing bottles and cans.
Belt trays are composed by 1 single compartment and 4
double compartments:
a single compartment may include products, the diam - -
eter of which lies between 62 and 70mm.
double compartments may include products, the diam
- -
eter of which lies between 66 and 70mm.
siNglE compartmENt
assemble a spacer for products, the diameter of which
is lower than 62mm., in order to arrange and slide prod -
ucts properly.
DoublE compartmENts
proDuct spacEr
assemble a spacer for products, the diameter of which
is lower than 65mm., in order to arrange and slide prod -
ucts properly.
The spacer is coupled into the holes on the left wall of
the compartments (see fig. 10) by means of brackets;
every single hole (A,B or C) will correspond to a different
size range of products used to fill the compartment.
fastening hole of the
spacer
diameter of dispensable
products
a from 53 to 56mm
b from 57 to 61mm
c from 62 to 65mm
attention !!!
It is important to know for which product and how
the compartment has been configured to load it
properly.
The table above has got a general character. It is in -
tended to specify the settings the manufacturer has ex -
perimentally established for some of the most common
types of products.
DEviators
Double compartments, -
softvEND
available , have a
product deviator (see figure 10, point 6) to allow the
products to properly fall into the
softvEnd
pocket.
Double compartments, -
softvEND
not available and
only if suitable for dispensing 33cl cans , have a
specific deviator (see figure 10, point 7).
fig. 10
Single compartment 1-
Product spacer (for some types of products only) 2-
Double compartments 3-
Product anti-turn-over partition 4-
Vandal-proof bracket (as a standard) 5-
Product deviator (as an alternative to can deviator) 6-
33cl can deviator (as an alternative to product deviator) 7-
Spacer assembly brackets 8-