Necta Korinto UL 120V, Installation, Use And Maintenance Manual

Page: 20 / 100

© by N&W GLOBAL VENDING SpA
16
07 06 275- 00
Notes on programming
The machine electronic control allows or not the use of
many functions:
All of the available functions are described in the machine
program, including the ones that are not used for the
specific configuration of the model (layout).
The machine is supplied with a dose table, describing the
different functions and layouts available for the specific
model and the flowchart of the programming menu.
Below is listed a summary explanation of the main func-
tions useful for managing the operation of the machine, not
necessarily in the order in which they are displayed in the
menu.
The software version can be updated using the specific
systems (PC, Flash, UpKey etc.).
The displayed massages indicating the operation being
carried out are fixed, while the instructions requiring an
action from the user are blinking.
POWER ON
Before switching the machine on, ensure that the grounds
trays and the container lids are into place.
Each time the machine is switched on, the display shows
the following message:
Korinto FB
REV 1.0
Press any selection button to continue.
It is possible to program the machine to enable the function
that displays the controls to be performed before starting
the machine, and namely:
Tubing (nozzles etc.)
Mixers
Powder feeder
Power on
For all controls the request “Confirm?” is indicated on the
display.
Press any selection button to continue.
The function of presenting the list of preliminary controls
can be enabled (disabled by default) from the program-
ming menu.
At the end of the power on cycle, the display indicates the
software version number, present on the CPU board and
on the control board of the brewer unit.
POWER ON
Confirm?
Press any selection button to continue.
The machine can be programmed for displaying, for a few
second, the number of selections made.