NEC VisuaLink 128/384 User Manual Download Page 14

Page: 14 / 154

Page 1-4

NDA-24230 Issue 2.0

Chapter 1

VisuaLink 128/384 User Guide

Table 1-2: Optional parts to be provided (continued)

(D) Camera

A pan/tilt zoom focus camera that provides a video image shot
to the far-site.

Note: Used in the turnkey rollabout configurations.

(E) PC Camera

A fixed camera used to provide a one or two person shot to
the far site.

Note: Used in the desktop application.

(F) Monitor

A TV monitor to provide for viewing of the far-site.

Note: Provided with the turnkey rollabout configuration.

(G) Cabinet

A equipment stand to house all the Rollabout peripherals
such as the VisuaLink and NT1’s.

Note: Cabinet is used for the turnkey rollabout configuration.

Summary of Contents for VisuaLink 128/384



























































































































































Search results

Summary of Contents for VisuaLink 128/384

Reviews:

Related manuals for VisuaLink 128/384

Brands by name

Popular brands

NEC VisuaLink 128/384, User Manual

Search results

Summary of Contents for VisuaLink 128/384

Reviews:

Related manuals for VisuaLink 128/384

Brands by name

Popular brands