manualshive.com logo in svg

NEC VERSA P, Manual

Share
Download
NEC VERSA P Manual Download Page 68

    

 Adding Options   3-15

Serial Devices

 To install a serial device such as a printer or an external
modem, you need a cable with a female 9-pin connector.

 NOTE: Before you connect a printer, be sure you
have installed the appropriate printer driver through
the Windows Control Panel.

 Follow these steps to connect a serial device to your
Versa P.

1. 

Check that both the Versa and the device power is off.

2. 

Open the left-rear port cover and locate the serial port.

3. 

Align and connect the 9-pin connector with the serial
port on the system. Secure the connection with the
screws provided.

4. 

Align and connect the other end of the cable to the ap-
propriate port on the device. Secure the connections with
the screws provided.

5. 

Connect the power cable to the device and a properly
grounded wall outlet.

6. 

Turn on power to the system and the device.

 NOTE:   Make sure your printer is on line before
trying to print. See the printer guide for instructions.

 

 NOTE:  You can also use the serial port to connect
an external modem to your Versa P.

Summary of Contents for VERSA P


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands