manualshive.com logo in svg

NEC VERSA P, Manual

Share
Download
NEC VERSA P Manual Download Page 112

    

 If You Need Help   7-5

NEC FastFacts

 FastFacts is the NEC Technologies’ automated response
system that provides free technical information whenever
you need it, 24 hours a day, 7 days a week. Simply call
FastFacts from a touch-tone phone. Listen to the instruc-
tions and order the documents you need or a list of available
documents and catalogs.

 Placing an order takes only minutes and the information
goes directly to your fax machine.

 Reach FastFacts by dialing:

■  

1-800-366-0476 (U.S. and Canada)

■  

1-708-860-9500 x2621 (International).

 FastFacts contains the following information:

■  

Product brochures

■  

Technical information bulletins, including:

 

Installation procedures

 

Quick reference guides

 

Troubleshooting information.

NEC Bulletin Board System

 The NEC Electronic Bulletin Board System (BBS) is
available to all customers free of charge. If you dial us
directly at (508) 635-4706, your only expense is the
cost of the phone call. The BBS is also accessible through
CompuServe for customers who are already members. The
CompuServe password is “GO NECTECH.”

 The BBS provides the most up-to-date service tips, drivers,
BIOS updates and is available 24 hours a day, 7 days a
week. You have access to information developed by our
technical support team to ensure superior operation of your
NEC system.

Summary of Contents for VERSA P


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands