manualshive.com logo in svg

NEC VERSA P, Manual

Share
Download
NEC VERSA P Manual Download Page 102

    

 Problem Solving   6-3

 Troubleshooting

 PROBLEM

 WHAT TO DO

  The suspend button 

does not work

 Power management is disabled in Auto Setup.

 A disk drive might be busy. Wait until the disk drive
stops and try again.

 

 The docking station might be connected to the
Versa. Some power management functions do
not work when the docking station is connected.

  System BIOS cannot  

be reprogrammed

 System Configuration switch 1 may be in the
up position (on). Move switch 1 down and retry
flashing a BIOS.

 

START-UP PROBLEMS

 The system displays an invalid configuration error message
at power on when there are the following conditions:

■  

current configuration information does not match con-
figuration information stored in Auto Setup, such as
when an internal option is added.

■  

the system loses configuration information.

■  

the lithium battery for the CMOS is depleted.

 If any of these conditions is true, the system displays an
“invalid configuration information” message.

 To continue start-up procedures, press 

F1

 and run Auto

Setup to set current system parameters.

Summary of Contents for VERSA P


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands