2-10 Installation and Upgrade
8.
The System Settings Change message offers to restart your computer so the
new settings can take effect. Click Yes.
Installing from Device Manager
Use this procedure if you cannot access the Change option through Mouse
Properties (for example, your current driver substitutes its own control panel).
1.
From the Start menu, select Settings, Control Panel.
2.
Double click System to open System Properties.
3.
Select the Device Manager tab.
4.
Click the plus sign next to the Mouse category. Then double click the
current device name.
5.
Select the Driver tab and click Change Driver.
6.
If the Select Device screen appears, then click Have Disk.
7.
Insert the ALPS touchpad driver disk (APOINT.INF) in your diskette drive.
Confirm or correct the source file path (normally "A:\"), then click OK.
8.
Click VersaGlide, then click OK.
9.
If returned to the property sheet Driver tab, then click OK to copy the driver
files to your system.
10.
The System Settings Change message offers to restart your computer so the
new settings can take effect. Click Yes.
Note:
After installation is finished, go back to the
Mouse Properties for the added VersaGlide Control Panel.
Refer to README file for more information on the
VersaGlide.
Installing the Fast IrDA Driver (Windows 95 only)
Your notebook PC incorporates a Fast IrDA port that provides wireless data
transfer at maximum speed of 4Mbps. There are two steps to take to set up the
FIR port in Windows 95.
1.
Install the SMC Infrared Port driver and configure it as COM2.
2.
Install the Windows 95 IR program.
