Using the System Drives and Bays 5-9
Note
Before recording from the external CD-ROM drive to the internal hard disk
drive, disable the internal microphone. To disable the internal microphone, remove the
check from the Microphone box in the 'Show the following controls' window. Refer to the
instructions in Chapter 9, "Optimizing the Sound Quality," for details about recording.
Using the CD-ROM Drive as a Stand-Alone CD Player
If you purchase the CD-ROM AC adapter accessory, you can use the external 24X
CD-ROM drive as a stand-alone CD player. Follow these steps to use the CD-ROM
drive as a stand-alone CD player.
1.
Disconnect the CD-ROM drive from the NEC Versa FX system.
2.
Locate the CD-ROM AC adapter accessory.
3.
Connect the CD-ROM AC adapter to the AC Power port on the right side of the
CD-ROM drive.
4.
Connect the outlet plug of the AC adapter to an active electrical wall outlet.
5.
Follow steps 4-6 in the procedure, “Using the CD-ROM drive with your NEC
Versa,” to open the drive cover and insert a CD.
6.
Press the Play button to activate your audio CD!
Disconnecting the CD-ROM Drive
When disconnecting the CD-ROM drive cable, squeeze the release clips before pulling
the cable away from the system port or the CD-ROM drive.
Failure to squeeze the release clips may result in damage to
the cable connectors.
