Adding Expansion Devices 5-13
4.
Install the new memory module as follows.
Note
To remove a memory module, see “Removing a Memory Module.”
Before handling any internal components, discharge static
electricity from yourself by touching a nearby unpainted metal surface.
Locate the alignment notch on the module.
Align the notch with the key in the slot connector.
Holding the memory module at a 40-degree angle to the notebook, insert the
module connector into the socket. Firmly push the module into the socket.
Press down on the edge of the memory module until the locking tabs on the
sides of the socket snap into place, securing the module.
Installing the memory module
A – Module Alignment Notch
5.
Replace the memory bay cover and its screw. If removed, reinstall the optional
secondary battery (see “Secondary Battery” later in this chapter).
6.
Turn the system over. Reconnect peripherals and the AC adapter power cable.
