NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION User Manual Download Page 32

Page: 32 / 151

Getting Started 1-23

Replacing the cover

Turn the system over.

Battery Precautions

To prevent accidental battery ignition, rupture, or explosion, adhere to the
following:

WARNING

To avoid personal injury and property damage, read these battery
precautions on handling, charging, and disposing Li-Ion batteries.

Keep the battery away from heat sources including direct sunlight, open
fires, microwave ovens, and high-voltage containers. Temperatures over
140º F (60ºC) may cause damage.

Do not drop or impact the battery.

Do not disassemble the battery.

Do not solder the battery.

Do not puncture the battery.

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
























































































































































Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION, User Manual

Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands