NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION User Manual Download Page 91

Page: 91 / 151

4-30 Using Your NEC Versa

Check that both the NEC Versa and the device power are off.

Open the port cover on the back of the system and locate the serial port.

Align and connect the 9-pin connector with the serial port on the system.
Secure the connection with the screws provided.

Align and connect the other end of the cable to the appropriate port on
the device. Secure the connections with the screws provided.

Connecting a serial device

Connect the power cable to the device and a properly grounded wall out-
let.

Turn on power to the system and the device.

NOTE

Make sure your printer is online before trying to print. See the

printer guide for instructions.

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
























































































































































Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION, User Manual

Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands