NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION User Manual Download Page 88

Page: 88 / 151

Using Your NEC Versa 4-27

Open the port cover on the back of the system.

Attach the 15-pin cable connector to the monitor port on the system. Se-
cure the cable connection with the screws provided.

Connecting a monitor

Connect the monitor power cable and plug it into a properly grounded
wall outlet.

Follow any setup instructions in the monitor’s user’s guide.

Turn on power to the monitor.

Press the Suspend button to resume Active mode or power on your NEC
Versa system.

Press the

Fn + F3

function key combination to toggle between the LCD,

CRT, or simultaneous display on both.

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
























































































































































Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION, User Manual

Search results

Summary of Contents for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Reviews:

Related manuals for VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION

Brands by name

Popular brands