4-18 Using Your NEC Versa
The LapLink software that ships with your NEC Versa system (Windows 95
or Windows for Workgroups operating systems) provides ways for you to
use the IR port. Read the instructions in Chapter 2, “How to Use LapLink,”
for steps on using the software with the IR port.
INCREASING SYSTEM STORAGE AND MEMORY
As your needs grow and change, you may need to add an optional hard disk
drive with a greater capacity, or additional memory. Read the following sec-
tions to learn how to install an optional hard disk drive, or a memory mod-
ule.
Hard Disk Drive
You can increase the system’s storage capacity by replacing the standard
hard disk drive or adding a second hard disk drive in the VersaBay II.
(Adding a second hard disk drive is described in the section “Customizing
Your System with the VersaBay II.”)
NOTE
NEC Versa 6060 model hard disk drives can be used in other
NEC notebook computers such as the NEC Versa 2000 and 4000
Series systems. However, hard disk drives from earlier models can
only be used in the VersaBay II. Check the top of the hard drive for
a blue dot. If the drive case has the blue dot on it, you can use the
drive in either the internal drive bay or the VersaBay II.
Replace the hard disk drive as follows.
1.
Check that the NEC Versa power is off.
2.
Turn the NEC Versa system upside down with the front of the unit (Ver-
saBay II) facing you.
