7-10 Solving Problems
6.
At the R:\TOOLS prompt, press the Power button to
power off the system. Press the Power button again to
power on.
The system reboots and Windows reconfigures the sys-
tem. When the configuration finishes, an MS-DOS
“Custom Setup is now complete” screen appears.
7.
Reboot your system. (You can use the Power button,
press
Ctrl-Alt-Del
, or press the Hardware Reset Switch
to reboot.) The Windows Setup screen appears. Follow
the on-screen instructions to set up Windows.
You are required to reenter your Microsoft Windows li-
cense number.
Selective Installation
If a driver, application, or utility becomes unusable, use the
product Recovery CD to restore the selected files(s) as
follows:
1.
Boot your system into Windows.
2.
Insert the Product Recovery CD into the CD-ROM
reader.
If your system is set to automatically start CDs that
are inserted, a License Agreement window appears.
Go to the next step.
If your CD did not start automatically, double click
on the My Computer icon. Then double-click on the
CD-ROM reader icon.
A License Agreement window appears.
3.
Read the License Agreement and press the Agree button
to continue. (If you press the Do Not Agree button, the
utility window closes.)
