Using Your NEC Versa 4-29
6.
Hold the SO-DIMM at a 60-degree angle and align the
module connector and alignment notch with the socket
connector. Push the connector into the socket.
7.
Press down on the SO-DIMM until the locking tabs on
the sides snap into place, securing the module.
(Repeat these steps for the second SO-DIMM. If you
need to remove a memory module, see the next section
“Removing a Memory Module.”)
Inserting SO-DIMMs
8.
Replace the memory bay cover.
When you power on the system, the Power On Self-Test
should properly detect and test the added memory. (If the
memory is not detected, it may not be installed properly.)
Running PHDisk
If you increased system memory to 48-MB or more, you
must run the PHDisk utility to ensure that you have enough
file space reserved for the Save to Disk feature.
