4-20 Using the Hardware
Replacing the drive bay cover
8.
Turn the system over, power on, and run Setup to check the new configu-
ration.
Installing a Memory Card
Your NEC Versa 4200 comes standard with 8 megabytes (MB) of random
access memory (RAM). You can increase system memory to a maximum of
40 MB by installing one of the following memory cards in the system.
4-MB memory card
8-MB memory card
16-MB memory card
32-MB memory card
Use the following steps to install a memory card.
1.
Follow steps 1 through 4 in the preceding section, “Hard Disks,” to re-
move the hard disk drive.
2.
Locate the memory connector in the drive bay. (Note that the memory
connectors are located below the plastic plate and are visible in this
drawing for illustration purposes.)
Summary of Contents for VERSA 4200
Page 11: ...viii Contents ...
