NEC Univerge SV9100, General Description Manual

Page: 93 / 190

Issue 2.0
SV9100 General Description Manual 2-55

Cancel messages they left at other extensions
An extension user can leave Messages Waiting at any number of extensions. Also,
any number of extensions can leave a Message Waiting at the same extension. A
periodic VRS announcement may remind users that they have Messages Waiting.
Microphone Cutoff
Microphone Cutoff lets a multiline terminal user turn off their telephone handsfree or
handset microphone anytime. When activated, Microphone Mute prevents the caller
from hearing conversations in the user’s work area. The user may turn off the
microphone while their telephone is idle, busy, or ringing. The microphone stays off
until the user turns it back on.
Migration – SV8100/SV8300
The Migration – SV8100/SV8300 feature allows a UNIVERGE SV8100 database to
be converted to a SV9100 database to utilize the enhanced capabilities of the
SV9100.
UX 5000 Migration
A UX5000 database cannot be converted directly to an SV9100 database.
You must first convert the UX5000 database to an SV8100 database
using SV8100 PcPro and save the database file as (*.pcp). Next, convert
the SV8100 database to SV9100 database using SV9100 PcPro.
For detailed information converting a UX5000 database to an SV8100
database, refer to the UNIVERGE SV8100 – UX5000 to SV8100
Migration Manual.
Migration – SV9100-S to SV9100-E System
The SV9100 system is available in two different system sizes and can be migrated
from the SV9100-S system to the SV9100-E system. The SV9100-S system is
limited to 48 ports and the SV9100-E system can have a maximum of 1296 ports.
Mobile Extension
A mobile extension is an external telephone (preferably a mobile phone) linked to the
UNIVERGE SV9100 via a Proxy Port to operate as an internal single line telephone
extension. The extension sends DTMF signals to the system allowing access to the
system features. A registered Mobile Extension uses one analog port (ports are
reserved in groups of two), however,
no PCB support (analog or digital) is required.
The Mobile Extension port must be an unequipped extension port on the SV9100
system – no physical telephone is required on the SV9100 system.
IMPORTANT
Older telephones on new systems may be compatible but will have certain
limitations depending on installation and feature usage. Such limitations cannot
be listed due to site specific usage. NEC always recommends migrating to the
telephones advertised as compatible for specific systems.