NEC Univerge SV9100, General Description Manual

Page: 133 / 190

Issue 2.0
SV9100 General Description Manual 2-95
Warning Tone for DISA Callers
For DISA callers, with this feature enabled, the warning tone time begins when an
incoming DISA call places an outgoing call and either the inter-digit time expires or
the outgoing call is answered.
If an outside call is transferred to forwarded off-premise using an outside trunk, the
warning tone timer begins immediately. This occurs only if either trunk involved in the
call is programmed for this feature (Program 14-01-17). To transfer a trunk call
off-premise, Program 14-01-13 must be set to 1.
Wireless DECT (SIP)
The Wireless DECT (SIP) (Digital Enhanced Cordless Telecommunication) system
allows using DECT 6.0 DECT (SIP) handsets. These handsets provide the freedom
and convenience of a wireless telephone but also allow access to features provided
by the UNIVERGE SV9100 system.
The number of Wireless DECT (SIP) handsets supported by the UNIVERGE SV9100
is dependent on the number of SIP Client licenses.
Off-Hook Signaling
This feature enables the display of off-hook signaling on an IP DECT
terminal while talking with the 1st call.
Caller ID Display After a Call Transfer
Previously in case of screened transfer, if a call was from a trunk line or
legacy terminal, etc, the transferrer's calling party number was displayed
in IP DECT. In case of an unscreened transfer, the calling party number
from where the call was transferred is displayed on the IP DECT.
This feature enables the IP DECT terminal to display the calling party
number of the original caller (Transferee) when making a screened or
unscreened transfer to an IP DECT terminal.
Out of Range Call Warning Notification
With SV9100 software, it is possible to determine when a SIP-Dect
terminal is Out of Range or powered off. When an internal caller calls the
Out of Range SIP terminal, either a lock out tone or call forwarding can be
performed