NEC Univerge SV8100, Installation Manual

Page: 164 / 278

Issue 4.0 UNIVERGE SV8100
4 - 18
19
CTA Data Communication
Mode
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are
set to printer connection (1~2=on,
3~8=off).
0 = CTI Mode
1 = Non Procedural Mode
(Non-SCS)
0 15-02-20
20
Baud Rate for CTA Port
Select the baud rate to be used
by the CTA Adapter.
0 = 4800
1 = 9600
2 = 19200
2 15-02-19
21
Virtual Extension Access Mode
(when idle Virtual Extension
key pressed)
Determine whether a Virtual
Extension/Call Arrival Key(CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the
key functions as a DSS key to the
extension and for incoming calls
to that extension. When
Outgoing (1) is selected, the key
functions as a virtual extension
and can be used for incoming
and outgoing calls. When Ignore
(2) is selected, the key functions
as a CAR key and can receive
incoming calls only.
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
2
22
Multiple Incoming From
Intercom and Trunk
If enabled, this affects how a
Hotline key lights, based on the
setting in Program 22-01-01. If
22-01-01 is set to 1 for trunk
priority, the Hotline key lights
solid when a trunk call rings in. If
22-01-01 is set to 0 for intercom
priority, the Hotline key does not
light for incoming trunk calls, but
lights solid for intercom calls.
If 15-02-22 is disabled, Hotline
keys light solid for any incoming
calls regardless of the setting in
Program 22-01-01.
0 = Disable
1 = Enable
1 22-01-01
Item
No.
Item Input Data Default
Related
Program