NEC Univerge SV8100, Installation Manual

Page: 177 / 278

UNIVERGE SV8100 Issue 4.0
ACD Installation Manual 4 - 31
Function Number List
[2] Appearance Function Level (*00 ~ *99) (Service Code 752)
Function
Number
Function Additional Data LED Indication
 00 ICM Key None Red On: Off Hook on Intercom Call
Red Blink: Intercom Call on Hold
 01 Trunk Key Trunk Number (001~200)
Red On:
Trunk Busy by Another User
Green On:
Trunk Busy by Extension
 02 Trunk Group Trunk Group Number
(001~100) Red On: Trunk Busy by Another User
Green On: Trunk Busy by Extension
 03 Virtual Extension Key Extension Number or
Department Group Number Red On: Trunk busy by another user
Slow Blink (Red): Incoming Call
 04 Park Key Park Number (01 ~64) Slow Blink (Red): Call Placed in
Park by Another User
Fast Blink (Green): Extension
Placed Call in Park
 05 Loop Key 0~2 (0:Incoming, 1:Outgoing,
2:Both) Green On: Extension on an active call.
 06 Trunk Access Via
Networking Network System Number
(01~50)
 07 Station Park Hold None
 08 CAP Key CAP Orbit No. (0001~9999)

If CAP Orbit No.0000 is
used, the next available
orbit is automatically
selected.
 10 ACD Log-In / Log-Out Red On: Under log-on
Off: Under log-off
 12 ACD Emergency Call Red On: Under monitor, Override,
Standby
Fast Blink (Red): Supervisor
Telephone Receiving Emergency Call
 13 ACD Off Duty Mode Red On:
Under Off Duty
Slow Blink (Red):
Under Reservation
 14 ACD Start / End Red On:
ACD Operation End
 15 ACD Terminal Speech
Monitor Red On:
Under Monitor
 16 ACD Waiting Red On: Standby
 17 ACD Work Wrap Up Time Red On: Under Work Time
Slow Blink (Red): Under Reservation