NEC Univerge SV8100 Installation Manual Download Page 138

Page: 138 / 278

Issue 4.0

UNIVERGE SV8100

3 - 106



20-13-06

Class of Service Options (Supplementary Service) – Automatic
Off-Hook Signaling (Automatic Override)

Allows a busy extension ability to manually (0) or automatically (1) receive
off-hook signals.

Related Features

Supervisor, ACD Group

Supervisor, ACD System

Operation

To monitor an ACD Agent's call:

Only ACD Supervisors (Group or System) can use ACD Monitor.

Call the busy ACD Agent.



You must hear busy tone.

Press your ACD Monitor Key (Program 15-07-01 or SC 752: *15).



Your ACD Monitor Key lights.



You hear the agent's conversation but the agent is not aware that you are monitoring their
call.



Monitoring will continue until you press the ACD Monitor key or the ACD Agent hangs
up. For example, if the agent places a call on Hold but does not hang up, you will hear
Music on Hold.

To stop monitoring an ACD Agent's call:

Press the lit ACD Monitor Key (Program 15-07-01 or SC 752: *15).



Monitoring also stops when the ACD Agent hangs up.

Summary of Contents for Univerge SV8100























































































































































































































































































Search results

Summary of Contents for Univerge SV8100

Reviews:

Brands by name

Popular brands

NEC Univerge SV8100, Installation Manual

Search results

Summary of Contents for Univerge SV8100

Reviews:

Brands by name

Popular brands