manualshive.com logo in svg

NEC Univerge SV8100, Installation Manual

The NEC Univerge SV8100 System Hardware Manual is a comprehensive guide that provides detailed information on the functionality and operation of the SV8100 communication system. This invaluable manual can be freely downloaded from our website, ensuring easy access for users seeking in-depth knowledge on their NEC Univerge SV8100 product.

Share
Download
background image

Issue 4.0

UNIVERGE SV8100

2 - 12

S

ECTION

 5 

D

ETERMINE

 T

RUNK

 W

ORK

 S

CHEDULES

Trunk Work Schedules are similar to normal ACD Work Schedules except that they 
apply only to trunks assigned to ACD groups. Refer to 

 Assign Incoming Trunk Ring 

Groups to ACD Groups on page 2-14

. The Trunk Work Schedule allows you to divide 

a day into segments (called Work Periods) to determine when trunks route to ACD 
Groups. You can set as many as four Work Schedules, with up to eight Work Periods 
in each Work Schedule. Each day of the week has one Trunk Work Schedule, but 
different days can share the same schedule.

For example, Monday-Friday can have the same daily schedule where Work Period 1 
lasts from 8:00 AM to 5:00 PM. Saturday can have a Work Period 1 lasting from 8:00 
AM to 1:00 PM. Use the

 Trunk Work Schedule Worksheet (41-06-01) on page 2-13

 

and the sample below to set up Trunk Work Schedules.

1.

Designate a worksheet for each Trunk Work Schedule.

Make additional copies of the

 Trunk Work Schedule Worksheet (41-06-01) on 

page 2-13

 so you will have one worksheet for each Work Schedule.

In the upper right corner of each worksheet, write the number of the 
corresponding Trunk Work Schedule (1~8). The sample worksheet below is for 
Trunk Work Schedule 1.

2.

Assign Days of the week to each Work Schedule.

The day of the week assignment for each Trunk Work Schedule must 
correspond to the weekday assignments made in 

 Set Up Work Schedules and 

Work Periods on page 2-4

. For example, if Work Schedule 1 is set for Monday 

through Friday in 

 Set Up Work Schedules and Work Periods on page 2-4

, that 

assignment must be reflected in the Trunk Work Schedule.

3.

Set the start and stop time of each work period.

Enter a start and stop time for each Work Period. Keep in mind that if you leave

 

holes

 in your Work Schedule there will be periods during the day when the trunk 

does not ring the ACD Group. Also, try to accommodate the typical divisions of 
time periods during the day. For example, the sample worksheet below shows 
two Work Periods corresponding to day (1) and night (2).  

Summary of Contents for Univerge SV8100























































































































































































































































































Reviews:

No comments

Related manuals for Univerge SV8100

Unify OpenStage 15 Manual preview
OpenStage 15
Brand: Unify Pages: 19
Vigilate VIGIFC User Manual preview
VIGIFC
Brand: Vigilate Pages: 2
Vodavi STARPLUS Triad-S 1 User Manual preview
STARPLUS Triad-S 1
Brand: Vodavi Pages: 19
Uniden DECT2085-4WX Owner'S Manual preview
DECT2085-4WX
Brand: Uniden Pages: 68
ViewSonic VFM836 User Manual preview
VFM836
Brand: ViewSonic Pages: 27
TransTel Communications DK7 series User Manual preview
DK7 series
Brand: TransTel Communications Pages: 48
Tempo Fitness DSTS2 Operating Instructions Manual preview
DSTS2
Brand: Tempo Fitness Pages: 6
Genius DSC-1.3M Smart (Dutch) Manual preview
DSC-1.3M Smart
Brand: Genius Pages: 4
Easypix GOXTREMELIVE 360 User Manual preview
GOXTREMELIVE 360
Brand: Easypix Pages: 11
WATER WOLF UWC1.1 User Manual preview
UWC1.1
Brand: WATER WOLF Pages: 2
Doro AUB 300i Manual preview
AUB 300i
Brand: Doro Pages: 72
Dalsa Pantera TF 6M8 User Manual preview
Pantera TF 6M8
Brand: Dalsa Pages: 68
CCL DG-120 Operating Manual preview
DG-120
Brand: CCL Pages: 22
Gigaset Gigaser SL 88 User Manual And Safety Precautions preview
Gigaser SL 88
Brand: Gigaset Pages: 74
AT&T CL81101 User Manual preview
CL81101
Brand: AT&T Pages: 39
Celestron VistaPix 72204 User Manual preview
VistaPix 72204
Brand: Celestron Pages: 14
Kodak 8 MP - 8MP 3x Optical/5x Digital Zoom HD Camera Getting Started Manual preview
8 MP - 8MP 3x Optical/5x Digital Zoom HD Camera
Brand: Kodak Pages: 27
Cobra DC4200 User Manual preview
DC4200
Brand: Cobra Pages: 24

Brands by name

Popular brands

Load more brands