NEC Storage Manager Messages Handbook Download Page 281

Page: 281 / 499

Chapter 2 Message List

276

iSM13413: Target pair’s copy mode is

foreground.

[Classification] WARNING

[Explanation]

A request was made for a pair of volumes to change from the foreground copy

state into the synchronous copy mode or semi synchronous copy mode.

[Measures]

Move the volumes into normal suspend state, and then change the copy mode.

iSM13414: Conflict of volume list data has been

detected. Please update volume list
data.

[Classification] WARNING

[Explanation]

Inconsistency was found in volume list. Volume list is old and is not consistent

with system status.

[Measures]

Update the volume list.

iSM13415: Specified volume was ignored.

(<aaa...a>)

[Classification] WARNING

[Explanation]

Specified volume was ignored.

aaa...a

: Ignored volume (MV or RV)

[Measures]

Take measures with reference to a message that was output immediately before

this message.

Summary of Contents for Storage Manager Messages




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands

NEC Storage Manager Messages, Handbook

Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands