NEC Storage Manager Messages Handbook Download Page 144

Page: 144 / 499

Chapter 2 Message List

139

iSM07503: Resource table is re-created

[Explanation]

It indicates that the request is suspended since the disk array configuration is

changed.

This message is output on UNIX system.

[Measures] Retry.

iSM07504: Entry is not found

[Explanation]

It indicates that the request is suspended since the disk array configuration is

changed.

This message is output on UNIX system.

[Measures]

Retry after checking the related resources.

iSM07505: Service stopped

[Explanation]

It indicates that the request cannot be executed since the NEC Storage Manager

service is stopped.

This message is output on UNIX system.

[Measures] Unnecessary

iSM07506: Request cancel

[Explanation]

It indicates that the request is cancelled since due to disk array failure, etc.

This message is output on UNIX system.

[Measures]

For disk array failure, retry after recovering the disk array. For other cases,

retry after investigating the cause from syslog or iSM operation log.

Summary of Contents for Storage Manager Messages




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands

NEC Storage Manager Messages, Handbook

Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands