NEC Storage Manager Messages Handbook Download Page 219

Page: 219 / 499

Chapter 2 Message List

214

iSM11361: Specified LD is not found.

[Classification] INFO

[Explanation]

Specified LD cannot be found.

[Measures]

Check the status of the disk array.

iSM11362: Failed to bind RANK.

[Classification] INFO

[Explanation]

It failed in binding RANK.

[Measures]

Check the status of the disk array.

iSM11363: Failed to bind some RANKs.

[Classification] INFO

[Explanation]

It failed in binding some RANKs.

[Measures]

Check the status of the disk array.

iSM11364: Failed to bind Hot Spare.

[Classification] INFO

[Explanation]

It failed in binding Hot Spare.

[Measures]

Check the status of the disk array.

Summary of Contents for Storage Manager Messages




















































































































































































































































































































































































































































































































Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands

NEC Storage Manager Messages, Handbook

Search results

Summary of Contents for Storage Manager Messages

Reviews:

Related manuals for Storage Manager Messages

Brands by name

Popular brands